Kieselgur Liquid Powder 2 kg

Special product (powder), dry adjuvant - dust-free wet application

100% natural diatoms, very finely ground - highly drying grit for application in stables and household, respectively

Kieselgur consists of the ground skeletons of fossil diatoms, the so-called ‘diatoms‘. These skeletons consist of silicon oxide. The use of kieselgur as a natural raw material is becoming increasingly important. Its absorptive capacity is used wherever liquid or moisture needs to be bound.

Kieselgur is also approved for use in animal feed in accordance with EU regulations for all animal species. This means that it is extremely safe to use in the immediate vicinity of animal feed.

Kieselgur Liquid Powder is characterized by its good water miscibility and therefore allows dust-free application. Due to its specific, rapid drying, the effectiveness is fully maintained. Kieselgur Liquid Powder cannot be overdosed. The quantity applied to the required areas depends on the nature of the material. A light-colored coating should be visible everywhere on the treated areas.

Composition: 100% diatomaceous earth

Application recommendation: Mix 1 part Kieselgur Liquid Powder well with 3 parts water (by volume). Then apply liberally to the affected areas with a brush or spray in a spray bottle or garden sprayer (coarse nozzle, e.g. 0.5 mm), thereby repeatedly stirring the mixture well. In this way, stables or plants can be sprayed directly. The treated area should be completely covered with a kieselgur film. Powder residues can be brushed off after application and reused or removed with a vacuum cleaner. Kieselgur must be stored and applied dry, otherwise it will not be effective.

Depending on requirements, 10-20 g Kieselgur Liquid Powder/m² (= 1-2 kg/100 m²) should be applied. Accordingly, 1 kg of the product mixed with water is sufficient for ca. 12.5-25 m².

All commercially available, pressure-operated hand or backpack sprayers are suitable for application. The sprayers should be thoroughly cleaned with water immediately after use to prevent the sprayer from clogging (if necessary, remove all individual parts of the sprayer and clean separately).

Close packaging tightly after use. Can be stored indefinitely in dry storage. Attention: Light-colored materials can be discolored! Please test on a concealed area before use.